Olympia ProHome Base unit, Руководство по эксплуатации

Страница: 22 / 48

22
O
LYMPIA
P
RO
H
OME
SETTING UP THE BASE UNIT
Registering Sensors
You can register up to 64 sensors on the alarm system
base unit.
1
Select the Register menu option.
2
Confirm by pressing
O
. The display shows
Search...
3
Trigger the sensor to be registered.
To find out how to trigger the individual sensors,
see the Operating Manual under Accessories
- Sensors for the ProHome Series. This manual is
enclosed with the base unit.
4
The display shows the names of the active sensors,
e.g. Remote Key.
5
Confirm by pressing
O
. The display shows
Voice Record. You can either use the standard mes-
sage or record an individual voice message.
In the following descriptions, you can use either an indi-
vidually recorded voice message or standard message
for the registered sensor. The individually recorded voice
messages can be recorded or modified at a later point in
time.
When the corresponding sensor is triggered, the related
voice message is played over the loudspeaker of the base
unit.
6
Press
C
if you want to retain the standard mes-
sage of the registered sensor.
7
Press
O
to record an individual voice message.
Further information is available in Section Individu-
al Voice Message on Page 23 .