Olympia ProHome Base unit, Руководство по эксплуатации

Страница: 27 / 48

27
O
LYMPIA
P
RO
H
OME
SETTING UP THE BASE UNIT
The telephone unit and alarm are switched off:
• after pressing the
l
key on the remote control,
• after entering your entry code on the base unit and
confirming with
O
or
• when the person called ends the current connection.
The base unit is then in Silent mode.
Setting the Trigger Delay
You can set the actual alarm to be triggered after a delay.
This provides you with sufficient time to enter your apart -
ment or house and disarm the alarm system. You can set
a trigger delay between 0 and 240 seconds. You can also
select whether an acoustic signal (countdown) should be
issued from the base unit during this period or not.
If one of the sensors is tripped, the base unit must
be disarmed within the trigger delay period to
ensure no alarm is triggered.
1
Select the Alarm Setup menu option.
2
Confirm by pressing
O
.
3
Select the Trigger Delay menu option.
4
Confirm by pressing
O
.
5
Set the delay time.
6
Confirm by pressing
O
.
7
Select the Trigger Tone menu option.
8
Confirm by pressing
O
.
9
Switch the trigger tone to On or Off .
10
Confirm by pressing
O
.