Side W
all Panels
Side Solid W
all
Rear Solid W
all
Side Solid W
all
2x3 wall framing flush with
outside of floor framing.
Be sure that the
side wall panels fit
between the front
and rear wall panels
(sandwiched).
Optional
- Caulking
seams will help prevent
moisture from entering
at seam.
Caulking not
included in kit.
Rear W
all Panel
18.
With the corner wall attachment complete, position a second side wall
panel in place so bottom 2x3 wall framing is sitting flush with outside floor joists.
Wall siding should overhang floor by approximately 3/4”. When positioned
correctly, attach both side wall panel studs together as per
Step 17
.
17.
Position side solid wall into place on plywood floor. Butt both vertical wall
studs of side and rear walls together and attach with
3 - 2 1/2” Screws
. Screw at
the bottom, middle and top of stud to secure properly.
Hardware
S1
- 2 1/2” Screws
x 3 total
Hardware (Steps 18 - 20)
S1
- 2 1/2” Screws
x 21 total
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 13