1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 15
26.
Locate all Vertical Wall Trims. Attach
60” long side trim (3L) with 11 deg angle
cut end and then short (3M) trim on wall
seam with
10 - 1 1/2” Finishing Nails
.
Attach Rear Wall Trim on wall seams with
8 - 1 1/2” Finishing Nails
per trim.
Hardware
N1 - 1 1/2” Finishing
Nails
x 36 total
Parts
3L - Side Wall Vertical Trim
(1/4” x 1 1/2” x 60”-11 deg. end)
x 2
3M - Side Wall Vertical Trim
(1/4” x 1 1/2” x 32”” -Straight Cut)
x 2
3N - Rear Wall Vertical Trim
(1/4” x 1 1/2” x 83 1/2”-Straight Cut)
x 2
27.
Position Vertical and Horizontal Door Trims
lining up the 45 deg. cut ends. When in correct
location, attach with
20 - 1 1/2” Finishing Nails
.
Do a dry run before attaching.
Hardware
N1 - 1 1/2” Finishing Nails
x 20 total
Parts
3O - Vertical Door Trims
(1/2” x 2 1/2” x 80 3/4” - 45 deg. one end)
x 2
3P - Horizontal Door Trim
(1/2” x 2 1/2” x 41” - 45 deg. both ends)
x 1
28.
Position Vertical and Horizontal
Window Trims lining up the 45 deg. cut
ends. When in correct location, attach with
15 - 1 1/2” Finishing Nails
. Do a dry run
before attaching.
Hardware
N1 - 1 1/2” Finishing Nails
x 30 total
Parts
3Q - Vertical Large Window Trims
(1/2” x 1 1/2” x 36 7/8” - 45 deg.1 end)
x 2 /window
3R - Horizontal Window Trim
(1/2” x 1 1/2” x 32 1/4” - 45 deg both ends)
x 1 /window
