52.
Attach
4T - Facia Detail Plates
to cover
seams where Front Facia pieces meet and where
Rear Facia pieces meet. Secure with
4 - 1 1/2”
Finishing Nails
per piece.
Parts
4T - Facia Detail Plates
(5 1/2” high)
x 4
Hardware
N1 - 1 1/2” Finishing Nails
x 16 total
53.
Locate
4V - Window Inserts
. Before installing, dab caulk in siding channel
on both sides of window opening. This will prevent water from getting in behind
window. Position window in cavity and secure with
8 - 1 1/4” Screws
. Caulk gap
between siding and window at top. This requires a large amount of caulking but is
important to fill. Later, Window Trims will be installed to hide caulking. Complete
second Window Insert the same.
Parts
4V - Window Inserts
(18 1/4” x 23”)
x 2
Hardware
S2 - 1 1/4” Screws
x 16 total
Dab
caulk in siding
channel on both
sides of window.
Run
caulk in siding
gap at top.
Requires a large
amount.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 33