32.
Position and attach Center Roof Batten (45 1/2” long) and Outside 50” long batten as per
Step 31
.
33.
Locate
Batten Spacers
. Place one
Batten Spacer
above each Batten lengthwise along outside
Rafter. Attach each Batten Spacer to outside Rafter with
2 - 1 1/4” screws
per Batten Spacer (4 total).
Position and attach 2nd row of battens flush with Batten Spacers following
Step 31-32.
31.
Locate first row of Roof Battens (
3/4” thick x 3 1/2” wide x 50” long
x 2 - Outside & 1 @ 45 1/2” - Center).
Position on front of roof rafters.
Place 1/8” back from end of rafter. Batten will sit evenly on center rafters
overhanging 2” on the outside rafters. Attach batten with
1 - 1 1/4” Screw
per each rafter. Pre-drill with 1/8” drill bit first to prevent end from splitting.
Hardware (Steps 31 - 34)
S2
- 1 1/4” Screws
x 27 total
Double Rafters
1/8” back from rafter end.
Overhanging 2” on outside
rafter.
Parts (Steps 31 - 34)
3H
- Roof Batten - Out
(3/4” x 3 1/5” x 50”)
x 6
3G
- Roof Batten - Ctr
(3/4” x 3 1/5” x 45 1/2”)
x 3
3L
- Batten Spacers
(3/4” x 1 1/2” x 21 5/8)
x 4
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 21
