3. Rafter and Roof Section
Exploded view of all parts necessary to complete the Rafter and Roof Section. Identify all parts
prior to starting.
142 1/4”
142 1/4”
Advice:
Prior to installing rafters,
take time to confirm your walls are
level, square and plumb.
Measure diagonal at top and bottom
of walls corner-to-corner. This should
be approximately 142 1/4”. More
importantly, if measurements are not
within 1/4”, your walls are not square
.
Center Roof Battens
- 3pcs (Part 3G)
Metal Roof Panels - 5 pcs
(Part 3K)
Rear Soffits - L/R
- 2pcs (Part 3D)
Rafters - 9 pcs
(Part 3A)
Foam Enclosures
(several strips)
Facia Nailing
Strips - 2 Pcs.
(Part 3J)
Rear Soffit - Center
- 1pc (Part 3E)
Front Soffits - L/R
- 2pcs (Part 3B)
Front Soffit - Center
- 1pcs (Part 3C)
Outside Roof Battens
- 6pcs (Part 3H)
Batten Spacers
- 4 pcs (Part 3L)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 17