Thick butt of siding
Caulk
gap.
Caulk
gap.
Window
frame.
Siding Butt
Screw insert into
bottom (thick)
part of siding.
89.
To reduce possible water from penetrating
into the window cavity, caulk gap on both sides
of window opening prior to installing
Window
Insert.
Position insert in cavity and screw with
6 - 1 1/4” Screws
. On sides, make sure to
screw insert into the thick butt of the siding only.
Parts (Step 89)
Window Insert x 3
Hardware (Step 89)
S2
- 1 1/4” Screws
x 36 total
90.
Once Insert is attached,
caulk the “triangular gap”
between the Insert’s outside
flange and the siding. Also put
a bead of caulking horizontally
at top of window where the
flange and siding meet. This
additional caulking will also will
reduce the chances of moisture
entering into your shed.
Trim dado sits
in flange.
T
rim dado
91.
Position
Window Trim
around window doing a dry run first and attach with
4 - 1 1/2” Finishing
Nails
per piece. Window trim has a small dado on reverse face. Outside flange of window will roughly
sit in the dado to give a better fit.
Parts (Step 91)
Window Trim Package x 3
(Top - 24 1/16” Long
- Angle Cut Ends
)
x 1
(Sides & Bottom - 23” Long)
x 3
Hardware (Steps 91)
N1
- 1 1/2” Finishing Nails
x 48 total
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 48
