Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 4
3.
When Post and Baluster Section are
position correctly, fasten together with
4 - 2 1/2” screws per side.
Hint- screw both front sides (2 screws per
side) flip assembly over and complete the
other sides.
2 1/2” screws here.
4.
Complete 2nd Post/Upper Baluster
Attachments.
5.
Standing the Post/Baluster Assemblies will be
easier with 2 extra helpers. Carefully raise one of
the section up first and steady with 1 helper.
Raise the second assembly up and steady with
your other helper.
6.
While both sections
are held in place by
your helpers, locate a
3rd Upper Baluster
Section and place
between both sections.
Have your helper stand
close to your end to
assist you with the
lifting of the Baluster
Section while still
keeping the assembly
steadied.
Place assemblies
approx. 9 feet
apart.
You can find the
Square Drive Bit for
the screws in with
the Hardware Kit
Bag.
