16.
Once again position the 2x3 wall plate so it
sits flush on floor and siding overhangs.
Note:
Front Wall Panel is only 73” high.
19.
Locate both
Door Headers - Long and Short
(step facing up and out). Attach long header using
5 - 2 1/2” Screws
. Pre-drill right side and angle screw down. Line up header/filler/wall stud as shown
above. Position and attach short header using
2 - 2 1/2” Screws
as shown above.
18.
Locate
Front Left Corner Filler Trims
(2 @
3/4”
x 2 1/2” x 36”) and
Door Jamb
(1 1/2” x 3 3/8” x 73”). Attach both Fillers with
4 - 1 1/2” Finishing Nails
as shown above. Place
Door Jamb against inside wall stud and align with edge of filler. Attach Jamb with
4 - 2 1/2” Screws
.
17.
When correctly positioned, secure
Front Wall Stud to Side Wall Stud with
3 - 2 1/2” Screws
.
Pilot Hole
first.
3/4” thick
Filler.
Door
Jamb.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 12