38.
Correctly orientate Left Side Roof Panel, with shingles overhanging plywood on the side of the
shed and flush with plywood to the middle. Place on rafters with rear of plywood just about flush with
rafter ends but just slightly recessed. Doing so allows Rear Facia to sit better.
Shingles overhang
plywood on outside.
Rear of plywood
1/8” recessed
with rafter end.
Plywood flush
with shingles
on inside.
39.
For correct Roof Panel position, align panel so plywood sits evenly on Center Rafters. Complete
both roof Panels.
Roof Panel
centered on
rafter.
Roof Seam.
40.
With Roof Panels aligned, screw panels down to center rafters with
2 - 2 1/2” Screws
in
Bottom
Row of Shingles Only (1 screw per panel).
Screw Bottom Row
of Shingles ONLY for
now. Screw on angle
away from shingle
edge to prevent it
from cracking.
Push tight together
.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 21
