35.
With Rafter Section correctly aligned, secure rafters to walls using
90° Metal Brackets
. Start with
outside rafters and secure 2 Brackets with 1 1/4” screws. Screw into Wall Extension Framing at the
front, and Wall Panel top framing at the rear. Complete both sides.
90° Metal Brackets
36.
With outside rafters properly secured, completely secure remaining interior rafters using
6 - 2 1/2” Screws. Screw into rafters from inside of Extension Wall framing at front of shed and inside
Rear Wall framing at rear of shed, behind Horizontal Wall Cleats.
37.
There are 3 different plywood roof panel sizes required to complete roof.
48” wide x 32” long x 2 pcs. - Long Plywood Roof Panel
48” wide x 21 3/4” long x 2 pcs. - Short Plywood Roof Panel
4” wide x 53 3/4” long x 1 pc. - Center Plywood Roof Panel
Starting with rear left corner, position 48” wide x 32” long panel on rafters.
Plywood will overhang outside rafter by 2”. In the front, plywood will be recessed
1/8” back from rafter end.
2” overhang
Sits on outside of middle rafter
1”, and recessed 1/8” from edge
Front
Rear
48”
32”
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 20
