OLT Garden Chalet Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 19

OLT Garden Chalet Скачать руководство пользователя страница 8

13.

Locate 1

Shelf Support (2H) - 3/4” x 1 1/2” x 17 3/4”

and position on

vertical shelf support and rear wall framing. Drill pilot hole in support to
prevent splitting and attach with

1 - 1 1/4” Screw (E)

on each end.

Note

- Make sure shelf support is level prior to attaching. Attach second

Shelf Support to side wall framing as described and shown to the right.
Place

Shelf (2I)

on top of shelf supports.

Shelf Support (2H).

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]

Page 8

11.

Side walls are pre-drilled at top front. Before attaching header to side walls, have your helper

hold header and wall steady. Secure with

2 - 2 1/2” Screws (C)

per side.

12.

Shelving may be mounted on left or right side of Chalet. This manual illustrates the shelving being

mounted on the left side. First, locate the

Vertical Shelf Support (2G) 1 1/2” x 1 1/2” x 35”

.

Measure 19” from left side wall framing from the inside. Mark position on door header. Drill pilot hole
near end of shelf support to prevent splitting and attach to door header with

1 - 2 1/2” Screw (C)

.

20 1/2”

19”

Drill Pilot Hole to
prevent Splitting.

Door Header

1 - 2 1/2”

Screw

.

V

ert. Shelf Support

Shelf (2I).

V

ert. Shelf Support

Positioned 3/4” on Side
Wall framing.

Drill pilot

hole before screwing.

«
...
6
7
8
9
10
...
»

Содержание Garden Chalet




















Отзывы:

Нет отзывов