manualshive.com logo in svg

OLT Garden Chalet, Инструкция по сборке, Страница: 18 / 19

Поделиться
Скачать
OLT Garden Chalet Скачать руководство пользователя страница 18

Toll Free 1-888-658-1658              www.outdoorlivingtoday.com          [email protected]

Page 18

Roof Ridge Cap  
(4N).

37.

 

Center 

Roof Ridge Cap (4N)

 from 

side to side on the rear roof shingles. 
Overhang the ridge cap slightly off the 
back of the shingles. Secure with 

4 - 2” 

Screws (D).

 Be sure to screw through the 

ridge cap and into rear wall framing. 
Drill pilot holes in ridge cap to prevent 
wood from splitting.

39.

 Install the 

Barrel Bolt Plywood Spacer (UU) - 1/2” x 2 3/4” x 2 3/4” 

 3/4” from top of the right door with 

2 - 1” Silver Screws (F)

.  Position the 

Interior Silver Barrel Bolt (BB) 

on the plywood spacer and attach 

with

 4 - 3/4” Silver Screws (G)

.  Tap barrel of bolt with Hammer to mark location on header.  Open door and 

Drill with a 3/8” bit.

Right Door

Install 3/4” from 
top of Door.

38.

 

Attach 

Lower Door Stop (4O) - 3/4” x 1 1/2” x 8”

 

to floor with 

2 - 1 1/4” screws (E).

  To align correctly, 

close doors in best close door position. Mark and 
attach.  Drill pilot holes to prevent splitting.

Содержание Garden Chalet




















Отзывы:

Нет отзывов