Thick butt of siding
Caulk
gap.
Trim dado sits
in flange.
T
rim dado
Caulk
gap.
Window
frame.
Siding Butt
Screw insert into
bottom (thick)
part of siding.
76.
To reduce possible water from penetrating
into the window cavity, caulk gap on both sides
of window opening prior to installing
Window
Insert.
Position insert in cavity and screw with
6 - 1 1/4” Screws
. On sides, make sure to
screw insert into the thick butt of the siding only.
Parts
Window Inserts x 2
Hardware
S2
- 1 1/4” Screws
x 12 total
77.
Once Insert is attached,
caulk the “triangular gap”
between the Insert’s outside
flange and the siding. Also put
a bead of caulking horizontally
at top of window where the
flange and siding meet. This
additional caulking will also will
reduce the chances of moisture
entering into your shed.
78.
Position
Window Trim
around window doing a dry run first and attach with
4 - 1 1/2” Finishing Nails
per piece. Window trim has a small dado on reverse
face. Outside flange of window will roughly sit in the dado to give a better fit.
Parts
Window Trim Package x 2
(Top - 24 1/16” Long
- Angle Cut Ends
)
x 1
(Sides & Bottom - 23” Long)
x 3
Hardware
N1
- 1 1/2” Finishing Nails
x 32 total
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 42
