21.
Attach
Vertical Door Jamb
to Window Wall
stud in door opening with
4 - 2 1/2” Screws
.
Position so Jamb is flush with tip of bevel siding
on front Window Walls.
Parts
Vertical Door Jamb
(1 1/2” x 3 1/2” x 73”)
x 1
Hardware
S1
- 2 1/2” Screws
x 4 total
Flush to tip
of Bevel.
Flush with Window
Wall stud on inside.
22.
Attach
Door Header
to Vertical Door Jamb and Narrow Wall with
2 - 2 1/2” Screws
per side. Header is 3 1/2” wide at bottom and has a
1/2” thick x 3” wide strip of wood stapled to the top creating a notch or
dado effect. This notch needs to be positioned on the top facing the
front. The notch is necessary as the roof panel may hang up on the
Header and must sit flush on the rafter tops when attached.
Pre-drill to prevent splitting!
Parts
Door Header
(2” x 3 1/2” x 45 1/2”)
x 1
Hardware
S1
- 2 1/2” Screws
x 4 total
Notch to front
and on top.
Pilot Hole
first.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 16
