OLT GardenSaver GS84-SLIDER-PLY-AK Assembly Manual Download | Manualshive

Page: 1 / 35

background image

Outdoor Living Today www.outdoorlivingtoday.com [email protected]

Page 1

8x4 GardenSaver

Sliding Door - Plywood Roof - AK Siding

Assembly Manual

Revision #1.5

July 14, 2021

Thank you for purchasing
a 8x4 GardenSaver Shed
with Sliding Door. Please
take the time to identify all
the parts prior to assembly.

Please be aware that it is the
customers’ sole responsibility
to acquire the necessary
building permits and or obtain
approval from their local
county, municipality or HOA
prior to purchasing. Generally,
shed structures under 100
square feet do not require
permits in most jurisdictions
in the United States and
Canada.

In the event of a missing or broken piece, call the Outdoor Living Today Customer Support Line @ 1-888-658-1658 with-
in 30 days of the delivery of your purchase. It is our commitment to you to courier replacement parts, free of charge,
within 10 business days of this notification. Replacement parts will not be provided free of charge after the 30 day
grace period.

All structures purchased from Outdoor Living Today are covered for a period of one year for defects in manufacturing
and workmanship. Costs incurred for customer installations are not included.

Failure to use supplied parts included in this kit could result in poor product performance and may void your warranty.
Please contact Outdoor Living Today’s Customer Toll Free Line if you plan to deviate from our written instructions.

- Snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it
is advisable to sweep snow off roof frequently.
- If the product is elevated, any structural and building code requirements are solely
the customer's responsibility, and should be abided by.
- In areas with high or gusty wind conditions, it is advisable to install the structure
securely to the ground.
- Have a regular maintenance plan to ensure screws, doors, windows and parts are
tightly affixed.

Customer agrees to hold Outdoor Living Today and any Authorized
Dealers free of any liability for improper installation, maintenance and
repair.

Stock Code:

GS84-SLIDER-PLY-AK

Roof Area: 37.5 sqft

1
2
3
...
»

Summary of Contents for GardenSaver GS84-SLIDER-PLY-AK




































Reviews:

No comments

Related manuals for GardenSaver GS84-SLIDER-PLY-AK

Brand: Palmako Pages: 55

Brand: Palmako Pages: 31

Brand: Palmako Pages: 48

Brand: Décor et Jardin Pages: 16

Brand: Lifetime Pages: 96

Brand: Solid Pages: 29

Brand: Universo Consumer Products Pages: 24

Brand: Galvo Shed Pages: 4

Brand: Palmako Pages: 63

Brand: OLT Pages: 38

Pavilion PA28-2323-1

Brand: Palmako Pages: 28

Brand: Keter Pages: 44

Brand: GREENLINE Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands