97.
Position and attach 2nd Cupola Roof Panel
as per
Step 95.
98.
Continue to position and attach Cupola
Roof Panels. Gaps may appear between
Roof Panels but will be covered later by Roof
Ridge Caps.
99.
Position 8th Cupola Roof Panel in place
and make any necessary adjustments to
achieve best fit. Secure with 3 additional
2” screws per panel as per
Step 95.
100.
Locate 16” long Cupola Ridge Cap and
position on corner overhanging roof by approx. 1”.
Secure with 2 - 1 1/4” shingle nails 10” from butt.
101.
Place a 14 1/2” long Cupola Ridge Cap
8 1/2” from the butt of first cap. Secure with
2 - 1 1/4” shingle nails 10” from butt.
102.
Place a 10 1/2” angle cut end Cupola Ridge Cap
over 2nd cap 8 1/2” from butt and secure with 2 - 1 1/4”
shingle nails. Drill pilot holes to prevent splitting first.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 32
16”
long
8
1/2”
8
1’/2”
Angle cut at top.
14 1/2” long
10 1/2” long with
angle cut ends.