Octagon Skybox
Rafter
Notch on bottom
“V” Notch in end
24.
Locate 8 Skybox Pieces placing them with
Dado cut facing out and to the top.
25.
Position 2 pieces
together so angle cut ends
line up. When correctly
aligned, screw together
using 2 - 3” screws and 1
2” screw in top dado ledge
as shown in left illustration.
Attach remaining pieces to
complete Skybox.
26.
With your helper, lift the Octagon Skybox
up with the dado or “notch” of the Skybox facing
up. Place the “V” end of the Rafter in a corner of
Skybox
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 12
3” screws
B. Rafter Section
2” screw
3” screws
Angled Ledge
not accurately
shown in
picture.
Caution
- Next you will be installing Rafters. Rafters
will be unstable until Upper Rails Sections are
completed in
Step 34
. Rafters must be secured to
Upper Rails and cannot be left unattended.
