Narrow Trim 77 1/2”
56.
Attach
Narrow Rear
Wall Trim
(1 - 1/2” x 2 1/2” x 77 1/2”)
where rear wall panels come
together and leave a seam
with 6 - 1 1/4” finishing nails.
Align Trim so flush with bottom
Skirting.
Square
Cut
Facia
Angled
Facia
Square cut Facia positioned
between Angled Facia
Square Cut Facia
Angled Facia
57.
Position
Front Facia
(angle cut on ends) and Side Facia (square cut ends) in
corner. Line Facia up so square cut Facia is positioned between angled cut facia. Attach angled
facia to Plywood Roof Edge with 8 - 1 1/4” finishing nails per piece. Gap where facia boards come
together at peak will be covered in
Step 61.
Do a dry run using Fascia to help you correctly position
before attaching. Attach
Side Facia
to Rafter ends with 6 - 1 1/4” finishing nails.
58.
Attach remaining
Angle
and
Side Facia
as per
Step 57
. There are 2 Side Facia pieces per
side. Attach
Pentagon Facia Plate
at peak where Front Facia meet. Use 4 - 1 1/4” finishing nails
per piece to secure. Complete both ends.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 22