![background image](http://html.mh-extra.com/html/olt/12x8-studio-garden/12x8-studio-garden_assembly-manual_732290024.webp)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 24
Plywood flush
with end of rafter.
Plywood sits
even on 1- 2x4.
Front Outside
Roof Panel.
Rear Outside
Roof Panel.
Shingles overhang
plywood.
Do not attach Roof
Panel to Rafters until
Step 56.
Front
49.
Screw down Rafter Spacer Jig
onto Rafters with
2 - 2 1/2” Screws
per rafter assembly.
50.
Locate and identify all 6 Roof Panels which are identified with a tag. Left
and Right Roof Panels will have shingles overhanging the plywood on one
side and flush with the plywood on the other side. Center panels will have
shingles cut flush with the plywood on both sides.
Locate
3G
or
3I
-
Front Outside Right
or
Left Roof Panel
to begin. Carefully
lift on rafters. Plywood of panel will sit even with front of rafter and on one 2x4
of 3rd rafter.
Parts (Steps 50 - 55)
3G - Right Roof Panels
(50” wide - Front / Rear)
x 2
3H - Center Roof Panels
(48” wide - Front / Rear)
x 2
3I - Left Roof Panels
(50” wide - Front / Rear)
x 2
51.
Locate Rear Outside Roof Panel. Carefully slide panel up on rafters. Have your helper carefully lift
the front roof panel up (lift plywood and not shingles) and slide rear panel underneath bottom shingles until
plywood sheathing butts up flush with rafter spacer.
Hardware
S1 - 2 1/2” Screws
x 14 total
2 1/2” Screws
Roof Plywood flush
with Rafter Spacer