1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 21
Use clamps to hold
rafter in position.
Front Rafter
Overhang Spacer.
(14 1/2” long)
137 1/2”
40.
Position Rafter on gable wall framing. Locate
3F - Rafter Overhang
Spacer
and place underneath front of rafter flush against upper wall plate
to determine front rafter overhang position. Inside of rafter should sit flush
with inside of gable wall framing. Clamp in position but don’t attach yet.
Position opposite outside rafter as described and clamp in place as well.
Parts
3F - Rafter Overhang Spacer
(3F - 14 1/2” length)
x 2
41.
Before attaching, measure rafter spacing to confirm 137 1/2” and make
adjustments as necessary. With Rafter correctly positioned, attach to side gable wall
framing with
8 - 2” Screws
. Screw up from below the framing into rafter. Position other
outside rafter as above. Inside to inside measurement of rafters should be 137 1/2”.
Hardware
S3 - 2” Screws
x 16 total
42.
Lift and place remaining
5 rafters on upper wall plates.
Space equally apart for now.
Rear
Rafter flush with
inside of side gable
wall framing.
137 1/2” outside rafter alignment
is very important for the roof to
fit correctly. Measurement is from
inside-to-inside of each rafter.