4
E.
Installation instructions
1.
Connect the power cord to the machine and
plug into a 3 pronged grounded wall outlet.
Caution: Do not use a 2 pronged adaptor.
2.
Turn power switch on (located at rear of ma-
chine). “POWER/COMM” indicator will light.
3.
Open the paper cover.
4.
Insert the 210 paper holder before loading the
210 mm - type thermal paper roll.
5.
Grip the thermal paper roll, place one end over
the paper holder on the right side, and push
against the spring to insert paper roll. (See
arrow)
Paper must unwind over the top.
6.
Fold right edge of paper as shown in diagram.
