background image

28

S

IGNALS

 

AND

 

MESSAGES

Any 

problems

 that may arise are generally indicated by 

acoustic

signals

 (accompanied, in some cases, by 

visual signals

: error

LED "

" indicator on) or by 

error messages on the display

.

The fax machine also emits 

acoustic signals

 and shows 

mes-

sages on the display

, which do 

not indicate

 an 

error

 condition.

A

COUSTIC

 

ERROR

 

SIGNALS

Short 1 second signal

You pressed an incorrect key during an operating phase.

Long 3 second signal plus error LED indicator on

Transaction not carried out correctly.

Continuous signal

Request to hang up if you forgot to do so after an operation that
required the handset to be lifted.

note

To

 turn off 

the ERROR LED "

" indicator, press the 

 key.

E

RROR

 

MESSAGES

 

ON

 

THE

 

DISPLAY

 

 AUTOREDIAL NNN

No connection was established due to line errors or because the
correspondent is busy: the fax machine prepares to redial automati-
cally.

CHECK DOCUMENT, PRESS 

The document is not being fed correctly: replace the document on the

ADF and press the 

 

key to restore the fax machine’s normal

operation.

CHECK PAPER, PRESS 

The paper in the feeder has run out: add some more and press

 

to clear the message from the display.

The paper is not being fed correctly: replace the paper in the

feeder and press the 

 

key to restore the fax machine’s

normal operation.

CHECK PRINT HEAD

The fax machine does not detect the presence of the print head
because you have forgotten to install it or you have installed it
incorrectly: install/reinstall the print head.

Some of the print head nozzles are damaged and are having a
negative effect on the printing quality: clean the print head (see
"

Cleaning the print head and testing the nozzles

", chapter

"

Maintenance operations

").

COPY INTERRUPTED

You aborted the copy operation by pressing the 

 

key.

An error occurred during the document copying phase, prevent-
ing it from being printed: check the type of fault on the display and
correct it.

DOC IN MEMORY

The document received was saved because an error occurred dur-
ing the reception phase, preventing it from being printed immediately:
check the type of error (paper out or jammed, ink out, etc.) and
correct the fault.

MEMORY FULL

One or more documents received in the memory, due to an error that
occurred during reception, have filled the memory: check the type of
fault (missing or jammed paper, ink out, etc.) and correct it. The
documents will be printed automatically thus freeing space in the
memory.

NOT PROGRAMMED

You chose a one-touch dialling key or a speed dialling code that you
have not set: program the key or the code (see "

To set one-touch

and speed dialling

", chapter "

Transmission and reception op-

erations

").

OUT OF INK

The ink in the cartridge has run out: replace the print head (see "

To

replace the print head

", chapter "

Maintenance operations

").

PAPER ERROR, PRESS 

A sheet of printing paper got jammed during the copying or reception

phase: press the 

 key and then, if the sheet is not unloaded

automatically, check where it is jammed and remove it (see "

To re-

move jammed sheets of paper

", chapter "

Maintenance opera-

tions

").

POLL.RETRY NNN

You set polling reception and the connection was not established due
to line errors or because the correspondent is busy: the fax machine
prepares to redial automatically.

REMOVE DOCUMENT, PRESS 

A document jammed while the document was being copied or sent:

press the 

 

key then, if the document is not unloaded auto-

matically, remove the jammed document by hand (see "

To re-

move jammed documents

", chapter "

Maintenance opera-

tions

").

You aborted the document scanning phase by pressing the 

key.

RX ERROR

The document was not received correctly: press the 

 

key to

turn off the "

" error LED indicator and clear the message from the

display.

RX IN MEMORY

Reception continues in the memory because an error occurred dur-
ing the reception of a document, preventing it from being printed:
check the type of fault on the bottom line of the display and correct it.

SYSTEM ERROR NN

A fatal error has occurred on the fax machine: turn the fax machine off
and then on again. If the error persists, turn off the fax machine and
call the Customer Engineering Service.

Содержание Fax-Lab S101

































































Отзывы: