background image

VII

H

OW

 

TO

 

GET

 

STARTED

 

QUICKLY

T

O

 

SET

 

THE

 

DATE

 

AND

 

TIME

The 

first time

 you

 connect 

the fax machine to the 

power

supply

 or whenever there is a 

power failure

 you must set

the date and time as described below.

Once set, the date and time can be changed at any time,
see the "

To change the date and time

" section.

      

1.

Press the key:

The display shows:

DATE AND TIME

      

2.

Press the key:

 

 

The display shows:

FORMAT: DD/MM/YY

      

3.

If you want to select a different format from the one dis-
played, press the keys:

  

/

      

4.

Press the key:

  

The display shows:

FORMAT: 24 H

      

5.

To select the other time format (12 hours), press the keys:

  

/

The display shows:

FORMAT: 12 H

      

6.

Press the key:

  

The display shows:

DD/MM/YY   HH:MM

25-10-04        11:23

      

7.

To enter the new date and time (e.g. 26-10-04; 12:00),
press the keys:

-

As each digit is entered, the cursor will move to the next

one.

DD/MM/YY   HH:MM

26-10-04       12:00

      

8.

If you wish to move the cursor to digits to be modified, press
the keys:

  

/

      

9.

Then overwrite the digits with the correct ones, by pressing
the keys:

-

       

3.

To confirm the setting, press the key:

 

The display shows a country of destination, for example:

ITALIA

       

4.

To select  the desired country, press the keys:

 

/

The display shows, for example:

U.K./IRELAND

If your country is not present among those shown on the
display, see the table below:

COUNTRY

COUNTRY TO BE SELECTED

Algeria

ALGERIA

Bosnia

BOSNIA

Bulgaria

BULGARIA

Croatia

CROATIA

Czech Republic

CZECH REPUBLIC

Egypt

EGYPT

Greece

GREECE

Hungary

HUNGARY

Iran

IRAN

Israel

ISRAEL

Middle East

MIDDLE EAST

Morocco

MOROCCO

Poland

POLAND

RoW

INTERNATIONAL

Rumania

RUMANIA

Russia

RUSSIA

Serbia

SERBIA

Slovakia

SLOVAKIA

Slovenia

SLOVENIA

South Africa

SOUTH AFRICA

Tunisia

TUNISIA

Turkey

TURKEY

       

5.

To confirm the setting, press the key:

  

       

6.

To complete the procedure, press the key:

  

note

If you subsequently want to change these settings, press 

 + 

and repeat the procedure from the start, remembering always to

confirm the settings made by pressing the 

 button.

Содержание Fax-Lab S101

































































Отзывы: