30
Changing the Cash Register's Standard Settings
Proceed as follows if you wish to change any of the standard machine
settings indicated in the previous table:
1. Slide the control switch to the PRG position.
2. Type the
[number]
of the machine condition (1-23 as indicated in the
table) that you wish to alter.
3. Type the
[number]
of the required setting.
4. Press the
[RA/FC]
key.
5. Program another feature or exit the program mode by sliding the
control switch to the OFF position.
Example:
Program the cash register to print the total VAT amount at the
end of the customer receipt.
Type/Press:
[17] + [1] + [RA/FC]
Programming a Manager Password
You can define a manager password to prevent unauthorized access to
the machine's Z mode. Since the management report taken in the Z mode
resets transaction totals to zero, a management password prevents the
accidental resetting of these totals by unauthorized personnel.
Defining the Z Mode Manager Password
Proceed as follows to define a manager password that grants access to
the Z mode:
1. Slide the control switch to the PRG position.
2. Type your 4-digit manager password and then press the
[Charge]
key. The password entered is displayed and printed.
NOTE: If you define a manager password of 0000, the password
security protection feature will not work.
Example:
Define manager password 9876 for the Z mode.
Type/Press:
[9876] + [Charge]
NOTE: If you set a Z mode manager password, you will not be able to
print your Z management report until the correct password is
entered. If you attempt to print a Z management report, the
message "SEC Code" is displayed prompting you to enter the
password.
Clearing the Z Mode Manager Password
Proceed as follows to clear the manager password that grants access to
the Z mode:
1. Slide the control switch to the PRG position.
2. Type
[0] + [0] + [0] + [0]
and press the
[Charge]
key.
Содержание ECR 5500
Страница 67: ...Code 506626 P...
