Oliver 1908, Руководство пользователя по эксплуатации и инструкция

Страница: 28 / 46

11/12/09 1908S20001
1-27
TROUBLESHOOTING
There are no user serviceable parts on your
OLIVER Model 1908 Lidder
except for the
cutter blade
.
Should you experience problems with your machine call the
Oliver
Products Company 24 Hour Emergency Service number @ 1 800-253-3893
.
Please have the serial number of your machine available to give to the Customer
Service representative.
Before calling for assistance please check the list below to see if the problem you are
experiencing is listed. If it is, try the corrective action items listed for that problem
before calling for assistance.
SYMPTOM CORRECTIVE ACTION
Machine does not cycle
Make sure that the compressor is plugged in and
there is power at the outlet
Make sure that the airline is connected to the
compressor and the Model 1908
Make sure the air compressor is turned on
Check the air regulator to see that it is set
between 70 and 80 PSIG - If not, adjust it to this
setting - Turning the knob counterclockwise
lowers the pressure and clockwise raises the
pressure
Check to see that dwell setting knob is not past
“O” or “A”
Check to see if that conveyor chain tension is not
overly tight
Check to make certain that a tray carrier is not
installed improperly where the pins on the
conveyor chains are not engaged in the holes of
the tray carrier
Check to see that film has not wound around the
cutter mechanism to the point that it is bound up
on the tray carriers