Oliver 1908, Руководство пользователя по эксплуатации и инструкция

Страница: 9 / 46

11/12/09 1908S20001
1-8
Air Compressor Continued
The air compressor has been factory set. If for some reason the settings are not
correct, the following procedure should be followed to set the output pressure from the
compressor.
The gage shown below should be set at 80 PSI. This is accomplished by turning the
knob on the regulator clockwise to increase pressure or counter clockwise to decrease
pressure. It is recommended that the air compressor be left with the switch in the
“AUTO” position. The compressor will only run when there is a demand for air when it is
set in the
“AUTO” position. Leaving the switch in this position assures that the
compressor will be ready when it is needed.