Oliver 10047VS, Руководство пользователя, Страница: 24 / 58

24 |
Page Oliver Machinery 10047VS Shaper
Reposition featherboard:
Whenever possible, use featherboards to hold
the workpiece down for shaping. This reduces
the risk of kickback and keeps hands away from
the cutter.
This shaper comes with two featherboards and
mounting brackets, which allows various ways of
setting up the featherboard.
1.
Featherboard can be mounted on any
position along the fence. Loosen the
featherboard bracket locks [F] to adjust
featherboard position, and retighten them
when done.
2. The height of the featherboard can be
adjusted by loosening the featherboard
locks [E] .
3. If the featherboard needs to be lowered
even further, flipped over the mounting
bracket and mount the featherboard as
shown in the picture.
4. To hold down thick/tall stock, the
mounting bracket can be flipped 90° and
featherboard can be mounted as shown in
the picture:
5. The featherboard can also be directly
mounted on the aluminum fence if desired.
6. Additional featherboards (purchased
separately) can be mounted on shaper
table’s miter slot to ensure stock is pushed
firmly against the fence.