23
TROUBLE SHOOTING
Symptom
What to check
The player does not play.
-If disc is loaded in.
-If disc is loaded upside down.
-If disc is dirty or warped.
-If the player’s region code is the same as region code of DVD disc.
-If water condensation has occurred.
-If it occurs, take out disc and leave the player on for a few hours
unit it backs to normal.
There is no sound.
-If system connection is correct.
-If the power of speakers is turned on.
-If the sound setup of DVD disc is correct.
-If disc is dirty or warped.
There is no picture.
-If TV is turned on and is in correct video mode.
-If system connection is correct.
Poor AV performance.
-If disc is dirty, warped or damaged.
Cannot continue to play and
play a section repeatedly.
-If it is in A-B repeat status.
-If it is true, press A-B button to cancel it.
-If disc is dirty or damaged.
-If it is true, clean it or skip the section.
The remote control does not
work.
-If there are obstructions between the remote control and the
player.
-If the remote control is pointing at the player.
-If batteries are inserted or the polarity is correct.
-If batteries are weak.
-If it is true, replace them.
Howling(feedback)occurs.
Move the microphone away from TV or speakers.
lower the volume of player, TV and amplifier.
Others:
Static or other external interfere may cause the abnormity of the player. At this circumstance, unplug
the power-supply cord from the outlet and plug it in again to reset the player so that the normal operation will
be resumed. If you are still having problems, then please disconnect the power and consult your service center
or a qualified technician.