18
System Setup
- Select digital audio out
“Off”: the amplifier digital signal input off;
“RAW”: no decoding on the amplifier digital signal input;
“PCM”: the amplifier must be supported by PCM decoding or Dolby digital decoding function;
- Select LPCM Output:
When SPDIF Output under “ PCM” mode, you can select the LPCM out as” 48K”
ǃ
“ 96K” or “ 192K”.
3. Dolby Digital Setup
Press “
W
” to back to the audio setting page, in the audio setting page menu, move
ǃ
direction buttons to
choose “ Dolby digital setting”, press
Ǐ
PLAY
ǐ
button to enter the Dolby Setup page menu, and press
ǃ
to
choose Dual Mono, Dynamic item.
- Setup Dual Mono
“Stereo” : stereo output signal; “L-Mono” : left output signal; “R-Mono” : right output signal; “Mix-Mono” :left and
right output average signal.
- Setup Dynamic Compression:
Under “Dolby Digital Setup”, select “Dynamic” item, press
Ǐ
PLAY
ǐ
button to enter the selection, move
ǃ
to do the setting, the higher the compression rate, the less difference between high sound and woof. This item
is only available to the Dolby sound source.
4. Channel Delay Setup Page
Press “
W
” to back to the audio setting page menu, move
ǃ
button to choose “Channel Delay ”, skipping a
right menu and press
Ǐ
PLAY
ǐ
button to go in.
Under the “Channel Delay” mode, you can edit the settings to all speakers, refer to their position shown in the
picture. Choose a suitable option and enjoy surrounded sound effect.