20
System Setup
-Set Filter:
select different sampling frequency. “Off” means as CD sampling mode.
Video Setup Page
Press “Setup” key on the remote control, and press “
”
to select” Video Setup Page” , press
Ǐ
PLAY
ǐ
or
button to go into video setting page menu, and press
,
button to choose video output mode, picture setting
and so on. Choose “Component”, press
,
button to select YUV ,RGB, VGA. Press
Ǐ
PLAY
ǐ
to confirm.
- Set Component :
Select different Component output among “ YUV, RGB, VGA” mode. Or set it “OFF”. To
select “YUV”, means to output YUV signal; to select “OFF”, means component video output. The player is
always with signal output under all conditions. If it is connected to a component video display equipment,
suggesting the linkage be set on “OFF”.
-Set TV Mode:
You can choose between progressive and interlaced output when playing with “YUV” or
“RGB ”Mode.
-HD Mode:
There are two HD mode for your selection:720P and 1080I
-HDMI Setup
Press
“
W
” button to back to the root menu, and press , direction button to select “HDMI Setup” ,press
Ǐ
PLAY
ǐ
button to confirm.
-Choose HDMI:
This setting allows you to set the HDMI to be ON or OFF.
-Choose Resolution:
This setting allows you to choose different resolution according your preference. This
player supports six different resolutions : 480P(720),720P(60Hz),1080I(60Hz),576P(720),720P(50Hz) and
1080I(50Hz).