Olimpus FLUOVIEW FV500, Руководство пользователя, Страница: 85 / 470

Getting Started FLUOVIEW/
Outline of LSM Observation Procedures
1-53
Page
2. Check the [Locked] check box in the [Z Stage] sub-panel.
Do not turn the fine focus adjustment knob while the [Locked] check
box is checked, for this may damage the Z motor.
3. While observing the image in the [Live] panel, locate the plane to be observed by
displacing the stage using the <Z stage coarse adjustment> and <Z stage fine
adjustment> buttons in the [Z Stage] sub-panel.
1-2-8-8 Setting the Area to be Observed
When the observation targets are concentrated in a narrow area or when observation of
a specific area detail is required, the image of a limited area can be selected.
Fig. 1-13 [Pan]/[Zoom] Group Box
The 4 buttons represent directions, and
clicking a button moves the acquired image
area in the direction indicated by the button.
Clicking the square button on the center
returns the acquired image area to the center.
Clicking a point in the scale area
to change the value on a large
scale.
Clicking the top or bottom arrow
button allows fine adjustment of
the value.
Dragging the square knob allows
the value to be changed directly.
Click a point inside the circle to change the
position of the acquired image area directly.