Olimpus FLUOVIEW FV500 Скачать руководство пользователя страница 457

Страница: 457 / 470

Maintenance of Major System Units/

UV-Ar Laser

2-5

Page

2 Refill and Replacement

If the water level in the water tank is below the specified level, refill distilled water until

the specified level.

If the water is polluted by algae or moth, replace the water to ensure cooling.

Replacement procedure

Set [COOL DOWN CYCLE] to “O-OFF”.

2. Pump

water

out.

To eliminate water remaining in the cooling hose, switch [POWER] of the heat

exchanger “I-ON”, run it idle and pump out water which comes inside the tank.

Refill new distilled water until the specified level. Run the heat exchanger manually

and check the water level again. If it is below the specified level, refill additional

distilled water.

Close the water tank with the lid, place the top cover and tighten the 4 retaining

screws tightly using a screwdriver.

Plug the power cord into the power outlet and set the main circuit breaker to ON.

Set up for normal operation.

For details, see section 1-2-1, “Turning Power ON” in Volume [OPERATION

INSTRUCTIONS].

Consumable supply: Distilled water, about 10 liters (commercially available in 20-liter

bottles).

COOL DOWN CYCLE

Set to “O-OFF”.

POWER

Set to “I-ON”.

Содержание FLUOVIEW FV500























































































































































































































































































































































































































































































Результаты поиска

Содержание FLUOVIEW FV500

Отзывы:

Olimpus FLUOVIEW FV500, Руководство пользователя, Страница: 457 / 470

Результаты поиска

Содержание FLUOVIEW FV500

Отзывы: