30
EN
Read carefully this manual and the general precautions for safety before installing the com-
ponents and make sure to carry out the installation correctly
1.1 - SAFETY RULES
The following manual constitute an essential
part of the product. It must be kept in a safe
environment and has to be attached to the main
product.
Read carefully the instructions and warnings
written in this manual: these instructions are fun-
damental to guarantee safety during the installa-
tion, use and maintenance of the product.
The installation must be done flawlessly only
by qualified personnel.
It is not allowed to use the product for different
purposes other than the ones specified in this
manual.
The manufacturer cannot be held liable in case
of damage to people or objects caused by an im-
proper use of the product or by failure to comply
with the installation instructions given by this ma-
nual.
Ordinary and special maintenance operations
must be executed only by qualified personnel
and with original spare parts furnished by the
manufacturer.
The manufacturer cannot be held liable in case
of damage to people or objects in case the pre-
vious statement is not complied with, as it may
compromise the safety of the installation.
The installation, operation and maintenance of
the system must comply to the current laws con-
cerning thermal systems.
Remember to cut the power supply to the
-
SHERPA ACQUADUE S2 E SMALL system
before attempting any operation to the pro-
duct.
Symbol legend:
Failure to comply to the warnings may result
to injury hazards, which in specific circum
-
stance could end up being fatal.
Failure to comply to the warnings may re-
sult in damage, in some cases severe, to
objects, plants or animals.
The manufacturer cannot be held liable in
case of damage to people or objects caused
by an improper use of the product or by failu-
re to comply with the installation instructions
given by this manual.
Install the product on platforms that can
sustain the weight while at operating
speed (500kg).
Failure to comply may result in injury to peo-
ple, objects or animals which in specific cir
-
cumstance can be fatal.
Damage to the product or to surrounding
objects by collision, impact and crushing.
This kit must be installed in a partial-
ly sheltered place: it must not be expo-
sed to atmospheric precipitations (rain,-
snow,hail).
Possible damage due to precipitations.
Move the product while following the sa
-
fety measures and with care.
Failure to comply may result in injury
to people, objects or animals which
in specific circumstance can be fatal.
Damage to the product or to surrounding
objects by collision, impact and crushing.
Install the product to a solid wall not
subjected to vibrations.
The product may produce noise during
operation.
INST
ALLA
TION MANUAL
