ENGLISH
EN - 16
4.9 - BLOCKING THE REMOTE CONTROL
• Block the wired remote control
• Press the
and
keys together; the remote control is blocked (no key active) and the
icon
is displayed.
• In this condition, the appliance can only be controlled by the remote control supplied with the same.
• To unblock the remote control, press the
and
keys; the
icon switches off.
4.10 - AIR FILTER CLEANING FUNCTION
• The wired remote control records the total operating time of the appliance.
When the time of use reaches the pre-set value, the
icon switches on to indicate that the filter must
be cleaned (see appliance use and maintenance manual).
• Perform cleaning; hold the
key for 3 seconds to reset the message and resume the operating
time count from zero.
THE PRE-DEFINED SETTING VALUE OF AIR FILTER CLEANING IS 2500 HOURS
AND CAN BE SET AT 1250 HOURS, 5000 HOURS OR 10000 HOURS. THE SETTING
METHOD IS GIVEN IN THIS PART OF THE INSTALLATION MANUAL (RESERVED
FOR QUALIFIED TECHNICAL STAFF).
4.11 - SWING FUNCTION (SWING)
• If the appliance has the switch function, it can be used to adjust the direction of the air.
• Hold the
key for approx. 3 seconds to activate the function; the
icon switches on.
• Hold the
key for approx. 3 seconds to deactivate the function; the
icon switches off.
4.12 - FOLLOW ME FUNCTION
• When the appliance is operating and the
AUTO
or
COOL
(Cooling) or
HEAT
(Heating) mode has been
selected, press the
key to activate the
Follow Me
function.
NOTE:
Switch-over of the operating mode automatically deactivates this function.
• When the Follow Me function is active, the
icon switches on; the remote control displays the temperature
of the room and transmits the value to the appliance every 3 minutes.
5 - CERTIFICATION AND TECHNICAL REQUIREMENTS
• EMC must be compliant with CCC certification.
