ENGLISH
EN - 14
NOTE:
The wired remote control does not receive the vertical swing control instructions.
To activate/deactivate this function, it is necessary to operate on the relevant
key of the wired
remote control.
4.2 - SWITCHING THE APPLIANCE ON/OFF
• Press the
ON/OFF
key to switch the appliance on or off.
• When the appliance is off, press the
ON/OFF
key and the appliance starts; the
icon on the display
switches on.
• By pressing the
ON/OFF
key, the appliance stops and the
icon on the display switches off.
4.3 - SETTING THE OPERATING MODE
• Press the
key one or more times to set the operating mode.
The operating mode is selected in the following order
AUTO >
(COOL) Cooling >
(DRY) Dehumidification >
(HEAT) Heating >
(FAN) Ventilation >
AUTO .....
The icon corresponding to the function selected switches on (in the upper part of the display).
NOTE:
When the controller has been set at COOL ONLY, there is no HEAT.
4.4 - SETTING FAN SPEED
• In Cooling (
COOL
), Heating (
HEAT
) and Ventilation (
FAN
) mode, press the
key one or more times
to adjust the fan speed according to the following sequence:
AUTO > LOW (Minimum) > MID (Medium) > HIGH (Maximum) ≤ AUTO ....
• The
indicates the speed level selected.
NOTE:
In
AUTO and DRY modes, the fan speed is pre-determined and cannot be adjusted.
