OLEI LR-1BS3, Руководство пользователя

Страница: 3 / 19

User Manual LR-1BS35
OMEN-1BS35-202202
1
1. About this documen
This document summarizes supplementary information on mounting and electrical
installation as well as measured value output format of the LR-1BS3/5. It is aimed at sufficiently
qualified personnel for the purposes of installation, commissioning and further data processing.
Notes on commissioning, configuration and maintenance can be found in the LR-1BS3/5
operating instructions.
2. Safety information
 Read the notes on mounting and electrical installation before carrying out these tasks;
 Read additionally the LR-1BS3/5 operating instructions to familiarize yourself with the
device and its functions;
 The LR-1BS3/5 complies with laser class 1;
 Only use the device in permissible ambient conditions (e.g. temperature, ground potential).
Any applicable legal regulations or regulations of other authorities will have to be observed
during operation;
 Opening the screws of the LiDAR housing will invalidate any warranty claims against
OLEI;
 Repairs may only be performed on the LiDAR by trained and authorized OLEI service
personnel.
3. Product introduction
The LR-1BS3/5 is an opto-electronic laser scanner that electro-sensitively scans the
perimeter of its surroundings at a single plane with the aid of laser beams. The LR-1BS3/5
measures its surroundings using two-dimensional polar coordinates based on its measurement
origin.
With a scanning angle range of 270°, LR-1BS3/5 detects and outputs the target's angle,
distance and signal strength to facilitate the SLAM system to better identify the target.
Thus LR-1BS3/5 has been widely applied to industries such as robot obstacle avoidance,
safety monitoring, industrial automation, and intelligent logistics.
4. Installation and operation
4.1.
Mechanical interface
The LiDAR can be installed in two ways: back-mounted and bottom-mounted.
 Back-mounted
There are two M3 screw holes (hole depth is 3mm) at the back of the LiDAR.