General Information
7
CAUTION:
For safety reasons, this equipment must be operated and
serviced by qualified personnel only. Read and understand the instruction
manual completely before operating or servicing.
CAUTION:
High off-scale readings may indicate explosive concentration.
CAUTION:
Any rapid up-scale reading followed by a declining or erratic
reading may indicate a gas concentration beyond the upper scale limit which
may be hazardous.
CAUTION:
Before each day’s usage, sensitivity must be tested on a known
concentration of pentane or methane equivalent to 25%-50% of full scale
concentration. Accuracy must be within -0% to +20% of actual
concentration. Accuracy may be corrected by referring to the zero/calibration
section of the instruction manual.
The BM 25A/AW is CSA certified according to the Canadian Electrical Code
for use in Class I, Division 1 and Class I, Zone 1 Hazardous Locations within
an ambient temperature range of -20°C to +55°C. CSA has assessed only
the combustible gas detection portion of this instrument for performance
according to CSA Standard C22.2 No. 152. applicable only when the
instrument is used in the diffusion mode and has been calibrated to 50%
LEL CH4.
The BM 25A/AW is CSA certified according to the US National Electrical
Code for use in Class I, Zone 1 Hazardous Locations within an ambient
temperature range of -20°C to +55°C. CSA has assessed only the
combustible gas detection portion of this instrument for performance
according to ISA standard 12.13-1 applicable only when the instrument is
used in the diffusion mode and has been calibrated to 50% LEL CH4.
BM 25A/AW with pump or with PID sensors or with infrared sensors for
combustible gases detection is not CSA certified.
CSA certification does not include wireless communication used for
combustible gas performance. The wireless communication may only be
used for data collection or record keeping with regard to combustible gas
detection.
BM 25A/AW (with radio communication module) complies with Part 15 of
FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interferences, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Содержание BM 25A/AW
