12
220V~
5A
Mandatory
1. Should any of the following conditions occur, turn off the machine immediately
(electrical shock, sparks, or smoke may occur):
-Strange noises or vibrations during operation.
-Product is unusually hot, or has a burnt odor.
2. Please clean the plug regularly
If there is dust or moisture on the plug it could damage it. This may result in a fire.
-Unplug the power cord, and wipe it with a dry cloth.
-Unplug the power cord if the appliance is not used for a long period of time.
3. Before electrical maintenance, make sure to unplug the device.
-The product may suddenly turn on, leading to electrical shock or injury.
4. Please plug the power cord securely into the power outlet. If the plug is not
securely seated, this may cause overheating which may lead to electrical shock
and even fire.
-Do not use a damaged plug or loose power outlet.
5. Please unplug the cord using the plug insulator.
-Pulling the power cord to unplug it may cause damage to the
power cord, electrical shock, short circuit, or fire.
6. Should any of the following circumstances arise, please turn off the machine
power immediately and contact the service department:
-A switch does not work.
-Power cord or plug is unusually hot.
-You detect an abnormal sound or vibration.
-Any other abnormalities or malfunctions.
7. To prevent the hazard of electrical shock, only trained professionals should
disassemble the machine.
2. Cellular -Activated Carbon, cold catalyst filter (approximately once every two months)
-Clean the dust from the front of the filter with a vacuum cleaner.
-Place the filter in a ventilated area, this will allow harmful gasses
and germs to dissipate. Do not place under too much sun exposure.
-The filter is delicate. Do not press too hard on the filter while
vacuuming.
-Do not use water to clean this filter.
1
.
Pre-filter (approximately twice per month)
-Clean the surface of the filter with a vacuum cleaner or wash
with water. Allow to dry thoroughly.
Filter/Dust Sensor/Anion Producer Cleaning and Maintenance
For IEC:This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.Children should be supervised to ensure that they do not play
with the appliance.If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
For EN:This appliance can be used by children aged from 8 years and above and persons
with reduced physical,sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
13