Pump is equipped with built-in thermal protection. Follow below diagram for
correct electrical connection.
Electric Wire diagram
Controls prior to initial start-up
1. Check that the main voltage and frequency are according to the nameplate.
2. Before initial start up, make sure the water level in pool is over the water
outlet to let the pump prime the water.
CAUTION:
Starting the pump without water causes damage.
3. Make sure the pump connections to the pool and Filtration Set are secured.
Maintenance and cleaning
1. Your new swimming pool pump does not require any special maintenance or
programming. In case the pump will be idle for a long period of time, it is
recommended to disassemble, clean and store it in a dry, well-ventilated place.
2. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent, or a similarly qualified person, so that a hazard can be avoided.
3. Regularly clean your pump by removing the debris in your filter, so that the
inlet pipe will not block nor damage the pump.
Содержание SPS25
Страница 1: ......
