6
After Every Use
Keeping your seamer clean from sticky beer residue is key to
keeping everything working properly. Warm water and a rag is
all that is needed to keep residues from building up. Make
sure to dry everything off after wiping it down.
The upper chuck and rollers are made of hardened steel. After
every use, clean them with a wet rag and dry them thoroughly.
Use a dry rag to rub a thin layer of food-safe grease or oil
onto those surfaces to minimize surface rust.
Lift the 16oz lower adapter off the Lower Bearing and use a rag
to clean the Wave Spring (looks like a curved/bent washer) and
Washer with water. Dry them and apply some grease. Apply a
small amount of grease to the bearing as well before re-assem-
bling them in the same order (bearing-washer-spring-adapter).
