Make sure the correct adapter is in place for the can size you plan to use.
Adapters generally snap onto the top of the standard adapter like a “Lego” piece.
1.
-Rotate both operation levers outward to their starting positions.
2.
-Open the splash guard door by pulling the splash guard handle out and
downward.
3.
-Set a filled can (and end) onto the lower adapter and rotate the can back into
the seamer. The can should rest agains
t the “Can Guide
.
”
The can should stay
upright on its own once placed against the can guide.
4.
-Close the splash guard door. It should feel a bit heavy as it clamps the can
and will lock in-place with a solid feeling. *
note closing the splash guard will
not feel the same without a can loaded into the seamer
.
5.
-
Turn the power switch to the “on” position. The can will start to spin.
6.
-Rotate the first operation lever (right side of the seamer when facing it) until
the roller makes contact with the edge of the can end.
7.
Once the roller makes contact, continue to rotate the lever until it stops. It
should take 1-2seconds for the roller to rotate between initial contact and the
hard-stop.
8.
Once the lever has reached the hard-stop, hold for 1second, then
return the
lever to its starting position.
9.
-Repeat the same process for the second operation lever.
10.
-
Turn the power switch to the “off” position
11.
-Once the can has stopped rotating, open the splash guard door and remove
the can.
Sometimes it’s helpful to explain the things to NOT do. Th
ese include:
Do Not: use the left handle first
Do Not: hold both handles IN at the same time
Do Not: run either operation more than once.
Do Not: go back and do the first operation after the second operation is
completed.
-------------------------------------------------------------------------------------------------------------