Seaming
Seaming is super simple. The basic idea is to rotate the right handle all the way to
its stop, back it off to its starting position, then do the same for the left handle.
The can spins fast enough that the speed you go isn’t super critical, but you don’t
want to slam the handle
s in either. Keep in mind that it doesn’t take much force
to seam the can. As soon as the lever has hit its hard-stop the operation is
completed. Make sure to read through the detailed instructions below. It is a
good idea to run through the steps a few times without a can to get a feel for it.
Helpful tip: The can-guide (see above diagram) is capable of holding the can
upright and in the correct position to close the splash guard door. Set the can
onto the lower adapter and lean it back against the guide. Pull your hand out of
the machine and then close the splash guard door.