Oktava MKL-5000, Руководство по эксплуатации

Страница: 12 / 28

12
CONNECTION
1. Set the switch (6) to the position corresponding to the voltage
of the network used.
2. Insert the pin plug into the power filter unit (4).
3. Connect the input terminal (2) to the microphone using the
supplied XLR-5 - XLR-6 cable.
4. To connect the output terminal of the power supply unit to the
mixing console use any XLR-3 microphone cable (Fig. 5).
5. Connect the power supply unit to the mains by plugging the pin
plug into a power outlet.
6. Turn on the power switch (5). The alarm indicator (1) will light up
on the panel.
7. Wait 15 minutes before starting work to warm up the lamp in the
microphone.
Fig.5
DO NOT NETWORK THE POWER SUPPLY UNIT WITHOUT
CONNECTING THE WHOLE EQUIPMENT SET WITH CABLES
AND EARTHING IT.
WARNING! IMPROPER POWER SUPPLY MAY CAUSE DAMAGE
OF THE PRODUCT!