OKRA OKRA0750RWU790F30, Руководство пользователя

Страница: 19 / 41

8) DATA START TRANSMISSION 1 (DTM1) (R10H)
This command starts transmitting data and write them into SRAM.
In KW mode, this command writes
“
OLD
”
data to SRAM.
In KWR mode, this command writes
“
K/W
”
data to SRAM.
In Program mode, this command writes
“
OTP
”
data to SRAM for programming.
9) DISPLAY REFRESH (DRF) (R12H)
While user sent this command, driver will refresh display (data/VCOM) according to SRAM data
and LUT.
After Display Refresh command, BUSY_N signal will become
“
0
”
and the refreshing of panel
starts.
10) DATA START TRANSMISSION 2 (DTM2) (R13 H)
This command starts transmitting data and write them into SRAM.
In KW mode, this command writes
“
NEW
”
data to SRAM.
In KWR mode, this command writes
“
RED
”
data to SRAM.
EPD Module User Manual
2.5$7HFKQRORJLHV
5HY
19
／
41