OKRA OKRA0750RWU790F30, Руководство пользователя

Страница: 14 / 41

7.Command Table
W/R: 0: Write Cycle / 1: Read Cycle C/D: 0: Command / 1: Data D7-D0: –: Don’t Care
1)
PANEL SETTING (PSR) (REGISTER: R00H)
REG: LUT selection
0: LUT from OTP. (Default)
1: LUT from register.
KW/R: Black / White / Red
0: Pixel with Black/White/Red, KWR mode. (Default)
1: Pixel with Black/White, KW mode.
UD: Gate Scan Direction
0: Scan down. First line to Last line: Gn-1 Gn-2 Gn-3 … G0
1: Scan up. (Default) First line to Last line: G0 G1 G2 … … . Gn-1
SHL: Source Shift Direction
0: Shift left. First data to Last data: Sn-1 Sn-2 Sn-3 … S0
1: Shift right. (Default) First data to Last data: S0 S1 S2 … … . Sn-1
SHD_N:
Booster Switch
0: Booster OFF
1: Booster ON (Default)
When SHD_N becomes LOW, charge pump will be turned OFF, register and SRAM
data will keep until VDD OFF.And Source/Gate/Border/VCOM will be released to
floating.
RST_N: Soft Reset
0: Reset. Booster OFF, Register data are set to their default values, all drivers will be
reset, and all functions will be disabled. Source/Gate/Border/VCOM will be released to
floating.
1: No effect (Default).
EPD Module User Manual
2.5$7HFKQRORJLHV
5HY
14
／
41