The command reads the product revision, LUT revision and chip revision.
PROD_REV[23:0]:
Product Revision. PROD_REV[23:0] is read from OTP address 0x0BDD ~
0X0BDF or 0x17DD ~ 0x17DF.
LUT_REV[23:0]:
LUT Revision. LUT_REV[23:0] is read from OTP address 0x0BE0 ~
0X0BE2 or 0x17E0.~ 0x17E2.
CHIP_REV[7:0]:
Chip Revision, fixed at 00001100b.
25) VCOM_DC SETTING (VDCS) (R82 H )
26) PROGRAM MODE (PGM) (RA0 H )
After this command is issued, the chip would enter the program mode.
After the programming procedure completed, a hardware reset is necessary for leaving program
mode.
27) ACTIVE PROGRAM (APG) (RA1 H )
After this command is transmitted, the programming state machine would be activated.
EPD Module User Manual
2.5$7HFKQRORJLHV
5HY
29
/
41
Содержание OKRA0750RWU790F30
Страница 13: ...Serial Interface Timing Characteristics EPD Module User Manual 2 5 7HFKQRORJLHV 5HY 13 41...
Страница 16: ...EPD Module User Manual 2 5 7HFKQRORJLHV 5HY 16 41...
Страница 27: ...21 TCON S ETTING TCON R60 H EPD Module User Manual 2 5 7HFKQRORJLHV 5HY 27 41...
Страница 31: ...8 Block Diagram EPD Module User Manual 2 5 7HFKQRORJLHV 5HY 31 41...