H301-PRIOR-NZ100-H117
User Manual
REV 02
www.oko-lab.com
Pa
ge
6
5.
Connection of the Gas Supply
A single silicon tubing carries output gas from the Okolab Gas Controller to the H301-PRIOR-NZ100-H117. Silicon tubing
connects to a gas input - brass opening - located on a corner of the H301-PRIOR-NZ100-H117. See Figure 6. Connect by
gently pushing silicon tubing onto brass opening.
Gas Input
Figure 6.Connection with gas supply.
6.
Working with Perfusion
The Chamber Riser included with H301-PRIOR-NZ100-H117 features 12 perfusion holes for the insertion of perfusion
tubing up to 2.5 mm in outer diameter. Small screws plug the perfusion holes when not in use. (
Grub screws M3x6
).
Remove small screws as necessary before introducing perfusion tubing.
Figure 7 shows location of perfusion holes.
1.Frontal view
2.3D view
Perfusion dedicated opening
Figure 7. Perfusion
