Okolab H201-T-UNIT-BL страница 15 Скачать руководство пользователя | Manualshive

Страница: 15 / 50

background image

15

1

2

a

b

Figure 10. How to change the Temperature set point (a

–

b)

The set point regulation page will appear as in Figure 10 b. You can modify the set point by clicking on +

and -

. Once you have input the new set point temperature, press “

Set

” to save or “

Cancel

” to undo.

Tip

►

After any change in the set point value the controller enters into a transient regime, the Status

Indicator and the Top LED turn yellow (see paragraph 8.1.2). During the transient regime, the controller will
not trigger on alarm.

8.1.2

Controller Status: colours led and meaning

The H201-T-UNIT-BL can assume four different status, which are represented by the colors assumed by

the Status Indicator (pointer 1 in Figure 9) and by the TOP LED (if enabled, as indicated in paragraph 8.2.2.3):

The GREEN color indicates that the set-point value has been reached (within the

tolerance defined in the alarm subpage, see paragraph 8.2.2.5) and that the system is working
properly.

Controller Status: NORMAL

The YELLOW color indicates that the controller is in transient regime. The Yellow light

will appear after the controller is turned on and after any set point chance. The system is working
properly, it is not in alarm and no action is needed. As soon as the H201-T-UNIT-BL stabilizes the
temperature, the Controller Status changes to NORMAL and the color turn GREEN. If the H201-
T-UNIT-BL cannot stabilize the temperature of one or both heating devices within the maximum
time defined by the operator (see paragraph 8.2.2.5), the Controller Status changes to ALARM
and the color turn ORANGE.

Controller Status: TRANSIENT

The ORANGE colour indicates that the current Temperature value is out of the tolerance

defined in the alarm subpage (see paragraph 8.2.2.5). The controller triggers in Alarm.

Controller Status: ALARM

The RED color indicates that there is a problem with the unit itself (for example a

Temperature

sensor is broken). The system is in alarm. Turn the system off, wait for 5 minutes,

and turn it back on. If the color is still red, contact Okolab at www.oko-lab.com for support.

Controller Status: ALARM

Tip

►

The Top LED (see Figure 11) follows the same color code as the status LED.

To activate the Top LED, follow the instructions reported in paragraph 8.2.2.3.

«
...
13
14
15
16
17
...
»

Содержание H201-T-UNIT-BL



















































Отзывы:

Нет отзывов

Похожие инструкции для H201-T-UNIT-BL

8745 MFC Ethernet

Бренд: Burkert Страницы: 70

Бренд: ISC Страницы: 20

Бренд: Aurora Scientific Страницы: 21

Бренд: Clare Controls Страницы: 3

Бренд: Swegon Страницы: 11

Alicat Scientific IVCD

Бренд: Halma Страницы: 28

Бренд: S&C Страницы: 16

Бренд: Ravanson Страницы: 14

U1000 iQpump Drive

Бренд: YASKAWA Страницы: 706

Бренд: FlyDigi Страницы: 12

Бренд: Alpha Страницы: 16

Бренд: Salus Страницы: 24

Бренд: Eliwell Страницы: 4

Бренд: Scaime Страницы: 74

Бренд: Vimar Страницы: 4

Бренд: Naturela Страницы: 37

JABSCO 43670-0005

Бренд: Xylem Страницы: 8

Бренд: XingKeChuang Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды